How to Transfer eSIM From One iPhone to Another: Travel Guide

How-To

How to Transfer eSIM From One iPhone to Another: Travel Guide

Content Editor 30 views

Here is how to transfer eSIM from one iPhone to another: if the plan's issuer supports it, use Quick Transfer in Settings > Cellular on the new iPhone. If your plan is not offered there, install the travel eSIM again from its QR code or install details. Check your plan terms before you wipe, sell or trade in the old phone.

How to Transfer eSIM From One iPhone to Another: The Short Answer

Apple offers eSIM Quick Transfer between iPhones, but it only works for plans whose issuer supports transfers. A prepaid travel-data eSIM is not guaranteed to move this way. Treat Quick Transfer as the first thing to try, not a promise.

Here is the simple decision path:

  • Your plan shows up under Transfer From Nearby iPhone: approve it on the old phone and you are done.
  • Your plan does not show up: reinstall it on the new iPhone using the QR code, activation link or manual details from your order.
  • You no longer have the old phone: you need new activation details from the plan issuer.

This guide follows Apple's current guidance, Set up eSIM on iPhone. Apple updates software and menus often, so labels may differ on your model and iOS version.

Before You Start: Check eSIM Support and Unlock Status

Confirm that the new iPhone supports eSIM and is carrier-unlocked. A locked phone can refuse a plan from another provider. If you are unsure, run the eSIM device compatibility checker before you buy or install anything.

A desk with a passport, a new boxed smartphone and an older phone laid out before a trip.

To check for a carrier lock, open Settings > General > About and look for the lock or restriction entry. Wording varies by iOS version. If you see a restriction, or you are not sure what it means, ask your carrier to confirm. Our guide on using a travel eSIM on a locked iPhone explains what a lock can block.

Gather these items before you swap phones:

  • The order email with your QR code, install link or manual details.
  • A reliable Wi-Fi connection for both phones.
  • Your Apple Account password on both devices.
  • Your plan details, including when validity starts and what the terms say about reinstalling.

Step-by-Step: Transfer eSIM to New iPhone With Quick Transfer

Apple's requirements for eSIM Quick Transfer are specific. Both iPhones must be signed in to the same Apple Account. The old iPhone must be unlocked and nearby, Bluetooth must be on, and both phones need iOS 18.4 or later. The plan's issuer must also support the transfer.

  1. Connect both iPhones to Wi-Fi and keep them close together.
  2. Unlock the old iPhone and turn on Bluetooth on both phones.
  3. On the new iPhone, open Settings > Cellular (or Mobile Service, depending on region).
  4. Tap Set Up Cellular or Add eSIM.
  5. Choose your plan from the list, or tap Transfer From Nearby iPhone.
  6. On the old iPhone, approve the request. You may need to enter a verification code shown on the new phone.
  7. Wait for activation. Once the line activates on the new iPhone, the previous SIM is deactivated.
  8. Return to Settings > Cellular and confirm the line is on.

If your travel plan does not appear, do not keep retrying. Move to the fresh install route below. If retries fail even for a supported plan, see our list of fixes when an eSIM transfer is not working.

When a Travel eSIM Needs a Fresh Install

A prepaid travel eSIM from eSIM.site is usually delivered as a QR code, activation link or manual details. If Quick Transfer does not offer your plan, you will need to install it again on the new iPhone. Whether that is possible depends on the plan's terms and its replacement policy.

Do not assume an already-used QR code can be scanned a second time. Check your plan details or contact eSIM.site support before you wipe the old phone.

SituationWhat to try firstWhat to check
Plan appears in Transfer From Nearby iPhoneApprove the transfer on the old phoneLine is on and working on the new iPhone
Plan is installed but not offered for transferFresh install from the order detailsPlan terms on reinstalling and replacement
Plan not yet installedInstall directly on the new iPhoneWhether validity starts at install or first connection
Old iPhone lost, broken or wipedAsk the plan issuer for new install detailsReplacement policy and remaining data

Apple supports scanning a QR code through Settings > Cellular > Add eSIM > Use QR Code. Provider links and manual entry also work.

Validity timing varies. Some plans start counting when the eSIM is installed. Others start on the first connection in the destination. Whether a reinstall changes that clock is plan-specific, so read your plan details.

Quick Transfer is an iPhone-to-iPhone feature only. Moving to or from an Android phone needs a fresh install, and our guide to transferring a travel eSIM to a new iPhone from Android covers that route.

Can You Transfer an eSIM Without the Old iPhone?

Quick Transfer normally cannot finish without the old iPhone, because Apple requires you to confirm the transfer there. If that phone is lost, broken or already wiped, you need new activation details from the plan issuer. That could be a QR code, activation link or manual codes.

Whether eSIM.site can supply replacement details for a plan that is already activated depends on that plan's terms. Contact support with your order number before buying a second plan. If you are already abroad, our guide to moving a travel eSIM to a new phone mid-trip covers what works with limited Wi-Fi.

What If the Plan Is Already Activated?

An activated plan is the most common reason a transfer gets stuck. The eSIM profile may be tied to the old phone, and a used QR code may not install again. Keep these points in mind:

  • Note the remaining data and expiry date on the old phone first.
  • Try Transfer From Nearby iPhone before anything else.
  • If it is not offered, contact support with your order number and ask about reinstalling.
  • Leave the old phone untouched until the new one works.

Do not delete the eSIM to "reset" it. If it has already been deleted, read our article on an accidentally deleted travel eSIM.

What to Check on the Old iPhone Before Wiping It

Do this before you erase, sell or trade in the old phone. Once the eSIM is deleted, getting it back depends on the issuer.

Hands holding an older phone beside a laptop and charging cable while preparing to back it up.
  1. Make a backup. Use iCloud or a computer so your apps, photos and settings reach the new phone.
  2. Confirm the new line works. After a successful Quick Transfer, the old line is already deactivated. Check that the new iPhone shows it as on and has working data. If you installed a travel eSIM fresh, test it on the new iPhone before touching the old one.
  3. Check the travel eSIM's status. Note the remaining data and expiry date.
  4. Save your install details. Keep the order email, QR code, link and manual codes where you can reach them.
  5. Do not delete the eSIM as a troubleshooting step. Delete it only when you truly want it gone.

When you erase the iPhone, Apple asks whether to keep or delete eSIMs. Deleting an eSIM means you must contact its issuer to reactivate the plan. See Apple's Erase iPhone guide for the exact prompts.

How to Avoid Losing a Prepaid Data Plan

Most lost data comes from deleting, wiping or double-installing at the wrong moment. A few habits prevent it.

  • Read the validity rule. Check your plan details instead of guessing when the clock starts.
  • Do not assume reinstalling keeps your data. Remaining data and validity depend on the plan and the issuer's terms.
  • Avoid swapping phones at the airport. Do the transfer at home on stable Wi-Fi, ideally before departure.
  • Do not wipe first. Confirm the new phone works before you erase the old one.
  • Keep your order email. It is your proof of purchase and the easiest way for support to find your plan.

Set Up the Data Line and Roaming on the New iPhone

After the transfer or fresh install, check which line carries data. Apple confirms that supported iPhones can hold two active eSIMs, and you choose the data line yourself.

A traveler at an airport gate holding a phone with a carry-on bag and backpack nearby.
  1. Open Settings > Cellular (or Mobile Service).
  2. Tap Cellular Data and select the travel eSIM line.
  3. Tap the travel eSIM line and check its Data Roaming setting. Turn it on if your plan or Apple's roaming guidance calls for it.
  4. Keep the home line on for calls and texts if you still need them.

Roaming rules for your home line depend on your carrier's terms, so check them before you leave. Our guide on which line should have data roaming on explains the logic in more detail. Hotspot sharing, speeds, top-ups and phone numbers all depend on the plan, so check your plan details.

Quick Checklist Before You Fly

  • New iPhone supports eSIM and is carrier-unlocked.
  • Both phones run iOS 18.4 or later if you plan to use Quick Transfer.
  • Order email, QR code and manual details are saved.
  • Plan validity rule is checked: install-based or first-connection-based.
  • Backup is complete and the new phone connects on the intended line.
  • Travel eSIM line is selected for Cellular Data.
  • Old phone is erased only after the new phone is confirmed working.

If the Plan Cannot Be Moved

A replacement plan is only an option if your existing eSIM cannot be moved or reinstalled and you cannot wait for support. Before buying, confirm the new iPhone supports eSIM and is unlocked. Then compare current options below and read each plan's details for data, validity, hotspot rules and top-ups.

Frequently Asked Questions

How do I transfer eSIM to a new phone?

On a new iPhone, open Settings > Cellular > Set Up Cellular or Add eSIM, then choose your plan or Transfer From Nearby iPhone. The old iPhone must be unlocked and nearby. If your plan is not offered, reinstall it from its QR code or install details.

How to transfer eSIM to a new iPhone without the old phone?

Quick Transfer normally needs the old iPhone to approve the request. Without it, you need new activation details from the plan issuer. Contact eSIM.site support with your order number to ask about options for your plan.

Does a travel eSIM move automatically with Quick Transfer?

Not always. Quick Transfer works only for plans whose issuer supports it. Many travel eSIMs need a fresh install on the new iPhone, so keep your original install details until the new phone is working.

What if my eSIM was already activated?

An activated plan may or may not be reinstallable, depending on its terms. Do not assume you can scan the same QR code again. Check your plan details or contact support before erasing the old phone.

Will I lose my remaining data if I change iPhones?

It depends on the plan. A successful transfer should move the same line, but a fresh install may or may not keep remaining data and validity. Note your remaining data first and confirm the terms before you switch.

Can I keep my home number while the travel eSIM is on the new iPhone?

On iPhones that support two active lines, you can use your home line for calls and texts and the travel eSIM for data. Select the travel line for Cellular Data in Settings > Cellular. If you are unsure about a phone model, check it with the compatibility checker.

Share: